Characterization and thermal analysis of metalworking sludge as a partial substitute for clays in ceramic production

Resumo

This study evaluates the feasibility of using sludge from the metalworking industry (SMWI) as a partial substitute for clays in producing red ceramics for civil construction. The analysis of the white goods production process predicted the components of SMWI, potentially reducing the need for additional chemical analyses. According to the chemical analyses provided, SMWI is a non-hazardous solid waste, but not inert, due to the presence of aluminum, chlorine, and phenols, by Brazilian standards. The oxide composition of SMWI showed compatibility with the studied clays and data from the literature, suggesting its potential as an additive in ceramics. Rich in CaO and Al₂O₃, SMWI can enhance the mechanical strength of ceramics, although excessive addition may increase water absorption. Loss on ignition tests, thermogravimetry, and SEM-EDS analyses on SMWI and pure and 5% SMWI-added clays revealed the loss of volatile compounds and the formation of thermostable clay minerals. However, its distinct composition, with lower levels of Fe₂O₃ and SiO₂, and the need for adequate homogenization, requires caution to avoid impacts on the final properties of the ceramic products, such as water absorption and mechanical strength. Thus, the use of SMWI as a ceramic additive presents itself as a sustainable and viable alternative, although further studies are necessary to validate its application in compliance with Brazilian technical standards.